Peace of mind installation & service.

  Eurosun in partnership with Solar Repairs, with over 25 years of trading history, delivers quality installation and service.

High quality installation & service combined with a friendly approach.

We work very hard to make sure our customers achieve maximum satisfaction with our products and services. Visit our testimonials and reviews page to see what real people are saying about us.

solar installation

Do you know that water quality can damage & compromise the performance of your hot water system (Solar or non-Solar)?

Visit pure water filtrations to find out more.

REMEMBER:

Perth water has detrimental effects on your hot water systems’ life expectancy due to the chemicals. The term to determine chemical in the water is called Total Dissolved Solids (TDS). TDS can be determined from the study of water conductivity, measured in micro siemens per centimetre (µS/cm), which is directly proportional to the TDS content of the water. TDS (mg/L) is approximately 70% of the conductivity (µS/cm). High TDS in water content can build up sediment in the cylinder (tank), which will damage it and the components connected to it.

Systems’ Service Recommendation

300l hp

Rooftop Solar Systems – 3 years’ service checklist.

The items that are covered during the 3 years’ service checklist are:

  • Tank & collectors (panels) are flushed to remove any residual build up
  • External visual inspection
  • Check mounting brackets
  • Ensure that there are no leaks
  • Check for any other physical issues
  • Check electrical booster (thermostat and element)
  • Check gas booster
  • Check anode and replace it if required*
  • Replace the hot water safety valve
  • Replace the cold water valve
  • Water testing report on the current home water quality

*Replacement of parts involve additional cost.

Recommend us to a friend and once they go ahead with installation of a Rooftop system, you get a 3 years’ service for your Rooftop system for free.

Power Direct System – 3 years’ service checklist.

Please note that the Power Direct system requires very low maintenance but due to the fact that the sacrificial anode in the cylinder will dissipate as you use it, it is recommended to check it every 3 years. The 3 years’ service checklist includes:

  • Cylinder & panels are flushed to remove any residual build up
    • External visual inspection
    • Ensure there are no leaks
    • Check for any other physical issues
  • Check electrical booster (thermostat and element)
  • Check gas booster
  • Check anode and replace it if required to prolong the life of the cylinder*
  • Replace the hot water safety valve
  • Replace the cold water valve
  • Water testing report on the current home water quality

*Replacement of parts involve additional cost.

Recommend us to a friend and once they go ahead with installation of a PV Direct system, you get a 3 years’ service for your PV Direct system for free.

Register Now!

Register now to receive free service reminders to maintain the efficiency and reliability of your hot water system and/or solar power system.